Latest Upload Test JN0-481 Guide Online - Juniper Data Center, Specialist (JNCIS-DC) Exam Exercise

The mission of UpdateDumps is to make the valid and high quality Juniper test pdf to help you advance your skills and knowledge and get the JN0-481 exam certification successfully. When you visit our product page, you will find the detail information about JN0-481 Practice Test. You can choose the version according to your actual needs. JN0-481 free demo is available for free downloading, and you can do your decision according to the assessment. 100% pass by our JN0-481 training pdf is our guarantee.

In today's competitive IT industry, passing Juniper certification JN0-481 exam has a lot of benefits. Gaining Juniper JN0-481 certification can increase your salary. People who have got Juniper JN0-481 certification often have much higher salary than counterparts who don't have the certificate. But Juniper Certification JN0-481 Exam is not very easy, so UpdateDumps is a website that can help you grow your salary.

>> Test JN0-481 Guide Online <<

JN0-481 Exam Exercise | JN0-481 Valid Exam Objectives

The JN0-481 pdf dumps file is the most efficient and time-saving method of preparing for the Juniper JN0-481 exam. Juniper JN0-481 dumps pdf can be used at any time or place. You can use your pc, tablet, smartphone, or any other device to get JN0-481 PDF Question files. And price is affordable.

Juniper Data Center, Specialist (JNCIS-DC) Sample Questions (Q29-Q34):

NEW QUESTION # 29
What is one indicator in the Apstra UI that implies that changes to a blueprint are ready to be committed?

A. Each assigned device has been set to Deploy mode.
B. The Staged tab turns green
C. The Staged tab turns yellow
D. Interface maps have been assigned through Device Profiles.

Answer: B

NEW QUESTION # 30
Which statement is correct about making changes to a predefined device profile in Juniper Apstra?

A. The changes you make to a predefined device profile will be discarded and overwritten when upgrading the Apstra server version.
B. You must reboot the Apstra server after changes are made to a predefined device profile before they will become active.
C. Changing the predefined device profile will also affect deployed devices that use the same profile.
D. The processor load on the Apstra server will be negatively impacted when changes are made to a predefined device profile.

Answer: A

Explanation:
A predefined device profile is a configuration template that is shipped with Apstra software and supports most qualified Juniper devices. A predefined device profile cannot be changed, since any changes would be discarded and overwritten when you upgrade the Apstra server version. If you want to customize a predefined device profile, you can clone and edit it instead.

NEW QUESTION # 31
In the Juniper Apstra Ul. You are creating a VNI pool for virtual networks.
In this scenario, which VNI range is acceptable?

A. The valid VNI range is 2 through 4096.
B. The valid VNI range is 4096 through 16777214.
C. Any range is acceptable for the VNI pool.
D. The valid VNI range is 1 through 10000.

Answer: B

Explanation:
In the Juniper Apstra UI, you can create VNI pools for virtual networks that use VXLAN encapsulation in the overlay network. A VNI pool is a resource pool that contains a range of VNIs that can be assigned to the virtual networks. The valid VNI range for a VNI pool is 4096 through
16777214, according to the VXLAN standard. Therefore, the statement B is correct in this scenario. The following three statements are incorrect in this scenario:
Any range is acceptable for the VNI pool. This is not true, because the VNI range has a lower and upper limit defined by the VXLAN standard. The lower limit is 4096, and the upper limit is
16777214. Any VNI outside this range is invalid and cannot be used for VXLAN encapsulation.
The valid VNI range is 2 through 4096. This is not true, because the VNI range does not start from 2, but from 4096. The VNIs from 2 to 4095 are reserved and cannot be used for VXLAN encapsulation. The valid VNI range is 1 through 10000. This is not true, because the VNI range does not include 1, which is also reserved and cannot be used for VXLAN encapsulation. The VNI range also does not end at 10000, but at 16777214, which is the maximum possible value for a 24-bit VNI field.

NEW QUESTION # 32
You are adding a new switch to Juniper Apstra software. The Managed Devices page shows the
"0 OS- Quarantined" status. What is the proper next step to make the device ready for use in a blueprint?

A. Take the device out of maintenance mode.
B. Take the device out of drain state.
C. Acknowledge the device.
D. Install the agent for the device.

Answer: C

Explanation:
When a new switch is added to Juniper Apstra software, it initially shows the "0 OS-Quarantined" status, which means that the device is not yet managed by Apstra and has not been assigned to any blueprint. The proper next step to make the device ready for use in a blueprint is to acknowledge the device, which is a manual action that confirms the device identity and ownership. Acknowledging the device changes its status to "OOS-Ready", which means that the device is ready to be assigned to a blueprint and deployed.

NEW QUESTION # 33
Which two statements ate correct about the information shown in the exhibit? (Choose two.)

A. The system is fully managed by Juniper Apstra.
B. The physical ports are not part of the LAG.
C. The device shown is a generic system.
D. Four physical interfaces exist in a LAG facing the leaf pair.

Answer: C,D

Explanation:
A generic system is a device that is not managed by Juniper Apstra and does not have a specific role or type assigned to it. A generic system can be used to represent a server, a firewall, a load balancer, or any other device that is not part of the fabric. In the exhibit, the device shown is a generic system, as indicated by its role, system type, and management level. Therefore, the correct answer is B. The device shown is a generic system. A LAG is a link aggregation group that bundles multiple physical interfaces into a single logical interface. A LAG can provide increased bandwidth, redundancy, and load balancing for the network traffic. In the exhibit, the device shown has four physical interfaces that are part of a LAG, as indicated by their description and li_type. The LAG is facing the leaf pair, which are the two switches that connect to the device.

NEW QUESTION # 34
......

Actually, most people do not like learning the boring knowledge. It is hard to understand if our brain rejects taking the initiative. Now, our company has researched the JN0-481 practice guide, a kind of high efficient learning tool. Firstly, we have deleted all irrelevant knowledge, which decreases your learning pressure. Secondly, the displays of the JN0-481 Study Materials are varied to cater to all fo your different study interest and hobbies. It is interesting to study with our JN0-481 exam questions.

JN0-481 Exam Exercise: https://www.updatedumps.com/Juniper/JN0-481-updated-exam-dumps.html

Juniper Test JN0-481 Guide Online Most of them are consistently learning different things, JN0-481 test dumps of us contain questions and answers, and it will help you to have an adequate practice, You can also print this format of UpdateDumps's Data Center, Specialist (JNCIS-DC) (JN0-481) exam dumps to prepare off-screen and on the go, Juniper Test JN0-481 Guide Online Use high quality study materials and use online training courses.

Obtaining the JN0-481 certification is not an easy task, It manages which scene is currently active, and also controls game state, scores, game levels, and so on.

Most of them are consistently learning different things, JN0-481 Test Dumps of us contain questions and answers, and it will help you to have an adequate practice.

Prepare with Confidence Using UpdateDumps Juniper JN0-481 Exam Questions

You can also print this format of UpdateDumps's Data Center, Specialist (JNCIS-DC) (JN0-481) exam dumps to prepare off-screen and on the go, Use high quality study materials and use online training courses.

Sometimes, it's easier said than done.